Skip to product information
1 of 3


Dobinsons 1.5"-3.5" MMR 3-Way Adjustable Lift Kit 2006-2009 Toyota FJ Cruiser

Dobinsons 1.5"-3.5" MMR 3-Way Adjustable Lift Kit 2006-2009 Toyota FJ Cruiser

Regular price $2,790.00 USD
Regular price Sale price $2,790.00 USD
Sale Sold out

Dobinsons® 1.5"-3.5" MMR 3-Way Adjustable Lift Kit

2006-2009 Toyota FJ Cruiser

In a sea of lift kits how do you know what is right for you? Every person you talk to and every forum you go to recommends this, that and the third! It's about finding what is just right for you.

With that said, we are proud to offer Dobinsons! In our experience we have found that this setup is Dobinsons most advanced kit!


  • Complete suspension kit for 4x4 Off Road Use, fine tuned to match the vehicle
  • Fully re-buildable and re-valvable
  • vZero shock fade in all terrains with full load
  • Superior Designed Nitro Gas Monotube Shocks, thicker walls, longer travel
  • Corrosion resistant (EDP Surface Protection)
  • Direct, bolt-on replacement for easy fitment
  • 50mm hi-flow CNC 6061 Billet alloy piston
  • Heavy duty single piece lower leg
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Includes 2 Front MRA Struts, 2 Rear MRA Shocks, 4 Coil Springs.
  •  ***2.5" or more of lift, new UCA's are recommended***
  •  ****Coil seat for MRA59-A220 should be set at 226mm(8.83") for 3 inchesof lift, for 2 inches of lift the coil seat should be set at 213mm(8.38") from the strut bushing eye. Picture black and white on the listing is to reference how to measure. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****

KDSS Vehicles may not use long travel or lift more than 2" due to KDSS system complications.

Dobinsons offers this complete suspension system for the 2006 to 2009 Toyota FJ Cruiser with a 4.0L V6, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height.  Contact Dobinsons directly if you have questions before ordering.
Most customers add 3" of lift to the front and around 2" to the rear, to help level out the vehicle from front to back.
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world.
View full details